HOME > Products Introduction > EAS-PS/AT-100-Friendly Arc
EAS-PS/AT-100-Friendly Arc
Type EAS-PS
Wire feeding is pushing type
Features
（1）Gun weight without a motor is very light - 1.6kg.
Gun handling is very easy for mobile.
（2）Wire feeding drive is a strong & accurate AC-servo motor and feeds wires by double-rolls mechanism which feeds wires steady & strongly.
（3）Easy handling & trouble free.
（4）Low cost & low maintenance.
（5）Recommended an economical arc spray equipment for a job shop.
（6）Wire Size : ∮1.6mm or ∮2.3mm
PS Power Supply Spec. |
|
|---|---|
| Rated Input Voltage | 200 V |
| Phase | 3 phs. |
| Rated Frequency | 60/50 Hz. |
| Rated Input Power | 18 ｋVA |
| Operation Current Range | 50～250 A |
| Output Voltage Range | 20～36 V |
| Measurements | 450(W)×650(D)×825(H) |
| Weight | 120Kg |
Air Utility |
||
|---|---|---|
Item |
Main Air |
|
| Pressure | Kgf／cm² | 5.0～6.0 |
| MPa | 0.49～0.59 | |
| Flow （m³／min) | 0.89～1.0 | |
Type AT-100-Friendly Arc
Handy & Mobile-Arc Wire Spray for anti corrosion job
| Type FP Power Supply | |
|---|---|
| Rated Input Voltage | 200V |
| Phase | 3phs. |
| Rated Frequency | 60／50Hz. |
| Rated Input Power | 18kVA |
| Operation Current Range | 50～250A |
| Output Voltage Range | 20～36V |
| Power supply - Measurements | 450（W）×650（D）×825（H） mm |
| Weight | 120Kg |
| Spray Rate | ||
|---|---|---|
| Wire Size | Zinc | Aluminum |
| 1.6mm | 10.9Kg | 2.7Kg |
| Number Kg. per Coverage | ||
|---|---|---|
| Spray Wires | Wire Size mm. | Wire required ／ Kg |
| 0.1mmt（100μm）／1m² | ||
| Aluminum | 1.6 | 0.28 |
| Zinc | 1.6 | 1.0 |
| Air Utility | ||
|---|---|---|
| Item | Main Air | Sub air |
| Pressure MPa | 0.49～0.59 | 0.49～0.59 |
| Flow（L／min） | 570～700 | 850～1000 |
| Total Flow（m3／min） | 1.4～1.7 | |
Features
（1）Light weight gun-1.6Kg
（2）Push & Pull wires feed system by means of AC servo Motors
（3）Long cables：7mts. Long of light wgt. cables
（4）Trouble free operation
