THERMAL SPRAY ACCESSORY
TYPE CSC SPRAY CONTROL PANEL
The accessory required for gas flame spraying. It is necessary to set the specified gas, oxygen, air pressure and flow rate and to perform thermal spraying correctly.
GAS FLOWMETER (TYPE 2GF, 3GF)
The accessory for setting the flow rate of gas and oxygen for gas flame spraying. The measurement scale is expressed in L/min.
TYPE CAC AIR CONTROL UNIT
The accessory for setting the air pressure for gas flame spraying. The clear cups on both sides serve as barometers for moisture checking of incoming air.
TYPE CGA ACETYLENE GAS REGULATOR
The acetylene gas pressure regulator used in gas flame spraying.
TYPE CGP PROPANE GAS REGULATOR
The propane gas pressure regulator used in gas flame spraying.
TYPE CGO OXYGEN GAS REGULATOR
The oxygen gas pressure regulator used in gas flame spraying.
TYPE CHU CONNECTING HOSES WITH FITTINGS
The hoses with dedicated connection fittings necessary to connect the thermal spray equipment and each accessory for gas flame spraying.
TYPE CWS WIRE CONTROL UNIT WITH STRAIGHTENER
The accessory required for gas flame spraying. Straighten the wire wound into a bundle and send it to the thermal spray equipment.
TYPE EX-30 EXTENSION NOZZLE
The extension nozzle for spraying on inner diameters and narrow areas. 30cm and 60cm lengths are available.
